
-Precision Dispensers
-Double Liquid Robots
-Special Dispensers
-All Automatic Robots
-Syringes/needles
-Accessories



Watch Video
TAD3000D Micro-computer High Precession Dispenser
Brand: TAD/AS Model: 3000D Electrical source: 220 / 110v Power: 10w
TAD3000 micro-computer controlled dispenser mainly targets the case that needs high-precision, high-consistency, and the adjustable velocity. It can precisely control the dispensing time, the pause time, and the suck speed. It is controlled by computer. The parameters can be set easily.
Performance description:
The amount of gel is displayed by digital LED and can be adjusted anytime.
High precision. The minimum deposit can be as less as 0.001ml, the accuracy is 0.01%, the frequency is higher than 800 times/min.
Automatically adjust the dispensing time: 0.001s-99.99s. Automatically adjust the interval of dispensing: 0.1-9.9s.
16 adjustment model. Such as auto circulate, spit quantitatively at appointed time, constant spit, manual hidden, and etc.
Has the function of vacuum pumping, create a negative pressure to
The input air pressure is 10-100psi, the output air pressure is 1-70psi.
Appendix: Operation steps:
? Put liquid into the barrel, push in the piston.
? Assemble the barrel and the syringe.
? Connect one end of the syringe to the air outlet of the machine.
? Adjust the air pressure valve, set an appropriate pressure.
? Set the time of spitting.
? Connect the footswitch or the manual switch, turn it on.
? Start to spit.
The dispenser adapt to several kinds of liquid. The function of vacuum pumping can ensure the reserve of low-viscous liquid. (Refer to the instruction for more details)
Adapt to the following liquid: instant glue, red glue, anaerobic glue, black glue, silica glue, SMT red glue, yellow glue, silver glue, Si glue, epoxy resin, screws fixative, lubricating oil, and flux.
Applicable to the following things: cell phone keys, seals, switches, connectors, computers, digital products, digital cameral, mp3, mp4, electron toys, horns, buzzer, electronic components.