
-Precision Dispensers
-Double Liquid Robots
-Special Dispensers
-All Automatic Robots
-Syringes/needles
-Accessories



Watch Video
Suitable for glue that container particles or glue with high concentration (such as silver glue, si glue, red glue and epoxy).
Working voltage: 220V / 50Hz
Power: 6W
Working air pressure: 4.0~8.0Mpa/cm2
Dispensing time: 0.01~99.9 (adjustable)
Digital display of parameters and working time.
Can work with XY table semi-auto equipment or all-auto table of any brands.
Build in intermittent automatic switching function. Once the auto function is turned on, the machine can do intermittent quantitative work by itself.
Technical parameters:
? Way of control: E-channel compression
? Dispensing model: cycle / manual / quantitative
? Deposit: 0°~999°
? Suck back: 0°~999°
? Time interval of dispensing: 0秒~9.99秒
? Minimum deposit: 0.0005ml
? Dispensing speed: 0~200/min
? Repeatability: ±0.005%
? Special function: vacuum pumping to avoid glue dropping
? Electrical source:AC220V~240V、50Hz,10W
? Size:
? Weight: about
Adapt to following liquid: Le-tai drying glue, instant glue,Electrolyte, ink, medical liquid, oil, and other liquid with viscosity less than 10000cps.
Applicable to following things: bonding, fixing, point spray, liner spray, and etc.